Pressure washing in Stevenage
Driveways, patios, paths and decking across SG1 and SG2, washed properly and re-sanded so the joints do not wash out with the first rain.
Pressure Washing across Stevenage, done properly
Pressure washing in Stevenage is mostly about not damaging what you are cleaning. Block paving, Indian sandstone, concrete, imprinted concrete and decking all take different pressure and a different nozzle. Too much and you stripe the surface permanently.
We use a rotary surface cleaner on larger areas, which gives an even finish instead of the wand marks you get from someone working freehand across a whole drive.
Block paving gets re-sanded afterwards. Skipping that is the most common corner cut and it is why some drives look worse six months later than before they were washed.
What we have learned working in Stevenage
Things we plan around when we are doing pressure washing in Stevenage:
- The Old Town. Older property with original features, quite different to the rest of the town.
- Post war estates at Bedwell, Shephall and Broadwater. Consistent layouts, which means we can price and plan accurately.
- Great Ashby. Newer housing with modern finishes and the usual new build dust.
- Good road access. Stevenage is quick to move around, so rounds stay tight and slots hold.
What pressure washing in Stevenage includes
What a typical job covers. Agreed and priced before we start.
- Pre-treatment for algae, moss and black spot where it is needed
- Rotary surface cleaning for an even finish, not wand stripes
- Edges, steps and awkward corners finished by hand
- Debris cleared rather than blown into your borders
- Kiln dried sand brushed into block paving joints
- Sealing available on request, priced separately
We will tell you honestly if a surface is too far gone to come back. Some old concrete and badly stained sandstone will improve but never look new.
Booking pressure washing in Stevenage
Send a photo
A picture of the drive or patio and rough measurements is usually all we need to price it.
A fixed price
Priced by the job and the surface, not by the hour.
Wash, clear and re-sand
Pre-treat, surface clean, hand finish the edges, clear up, then re-sand the joints.
Before and after photos
You get them by email with the invoice.
What people say about MyT Clean
Pressure Washing in Stevenage, answered
How much is pressure washing in Stevenage?
It depends on the area in square metres and the surface. Block paving that needs re-sanding costs more than a plain concrete path of the same size. Send a photo and rough measurements and we will price it.
Will it damage my block paving?
Not at the right pressure with the right nozzle. The risk is real though, which is why we use a rotary surface cleaner rather than waving a lance around, and why we re-sand afterwards.
Do you re-sand the joints?
Yes, with kiln dried sand, as standard on block paving. It is the step most often skipped and the reason some drives fail quickly after a cheap wash.
Can you get rid of black spot on sandstone?
Usually much improved, sometimes not fully. Black spot lichen roots into the stone and needs chemical treatment as well as washing. We will be straight with you about what is achievable.
Which parts of Stevenage do you cover?
All of SG1 and SG2, including the Old Town, Bedwell, Shephall, Chells, Pin Green, Symonds Green, Broadwater and Great Ashby.
Do you need my water and power?
An outside tap is helpful. We can work from our own supply if you do not have one, just tell us when you book.
Get a price for pressure washing in Stevenage
Send a photo of the drive or patio and rough measurements, and we will come back with a fixed price.